Opening Hour

Mon - Sat, 9:00 - 6:00

Call Us

+91-9323405785

Email Us

info@vertexmachines.com

Bursting Strength Tester

Model: BST-S2
The Bursting Strength of sample is measured by applying the hydrostatic pressure required for producing rupture of the material, when pressure is applied at a controlled increasing rate through a rubber diaphragm. The value of bursting strength will give an indication of the maximum weight that may be carried in the box. The quality of corrugated boxes is graded based on the value of their bursting strength. Bursting Strength is a reliable index of the strength and performance of materials like paper, paperboards, corrugated boards and boxes, solid fibreboards, filter cloth, industrial fabrics, leather, Rexene, etc.



       

 

Bursting strength is a widely used measure of resistance to rupture in various materials. A test specimen isheld between two circular clamps and subjected to an increasing pressure from a rubber diaphragm. The rubber diaphragm is expanded by a controlled hydraulic pressure until the test specimen ruptures. The bursting strength of the specimen is the pressure reading at the time of rupture.

 

DisplayAnalogue
Opening in upper clamp30.5 mm diameter
Opening in lower clamp38.1 mm diameter
Rate of fluid displacement95 cc/minute
Pressure range0–8kg /cm² & 0–40 Kg/cm²
Motor½ HP Single Phase
Electrical RequirementSingle Phase 220 V AC, 50Hz

 

• Accurate, reliable and trouble free equipment.
• Flat angled gauges for greater accuracy.
• Maximum ponter ( lazy hand ) for peak value recording.
• Avaiable with single gauge or double gauge model.
• Various measuring capacity according to the requirements are available for greater accuracy.
• Pneaumatic clamping available as optional feature.